IP300UHD-RX

Receptor Multicast VoIP UHD HDMI 2.0 4K60 18 Gbps sobre red de 1 GB.

La plataforma de distribución multicast de la serie Blustream IP300UHD permite la distribución, prácticamente sin latencia (1 cuadro), de vídeo 4K HDMI a través de una red administrada de 1 Gb.

Con total interoperabilidad con la línea de productos IP350UHD, el IP300UHD-RX es un receptor HDMI 4K HDCP 2.2 que, utilizando tecnología de compresión visual sin pérdidas, ofrece HDMI a 18 Gbps, audio estéreo balanceado, IR bidireccional, RS-232 y USB/KVM hasta longitudes de 100 m sobre una arquitectura de red de cobre estándar, o distancias mayores utilizando la interfaz de red de fibra SFP incorporada.

El IP300UHD-RX cuenta con un segundo puerto LAN RJ45 para conectar en cadena la señal a otras unidades IP300UHD-RX.

Con un chipset de escalado HDMI completo de 18 Gbps integrado, la salida HDMI se puede ajustar a resoluciones más bajas donde se requieren pantallas heredadas en el mismo sistema que 4K completo. Las capacidades de escalado de esta unidad también permiten crear videowalls donde sea necesario.

La unidad se puede alimentar a través de PoE desde el switch de red, o localmente, si el switch no es compatible con PoE.

Con múltiples opciones de configuración disponibles, la flexibilidad de la solución de vídeo sobre IP Blustream Multicast hace que esta plataforma sea ideal para múltiples tipos de instalación.

Descargas

Guía de switch recomendados

Guía de switch certificados por Blustream

Descargar (79.48k)

Key Features

  • Advanced 4K HDMI 2.0 video over 1Gb managed network supporting 18Gbps HDMI signals

  • Virtually unlimited system size

  • Extends HDMI up to a distance of 100m over a single CAT cable

  • SFP port for signal distribution over fibre

  • Supports up to 4K UHD 60Hz 4:4:4

  • Supports HDR including Dolby Vision LLM

  • Supports all known HDMI audio formats including Dolby Atmos, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission

  • Advanced signal management for independent routing of IR, RS-232, USB/KVM, audio and video

  • PoE (Power over Ethernet) to power Blustream unit from PoE switch

  • HDCP 2.2 compliant with full 18Gbps scaling capabilities for inclusion of non-4K / legacy displays whilst distributing 4K to other parts of the system

  • Analogue L/R audio output support both balanced and unbalanced audio signals

  • LAN loop-out for one-to-many extender mode

  • OLED front panel display for advanced system information and manual configuration

  • Optional 24V power supply (should Ethernet switch not support PoE)

  • Compatible with Blustream IP300UHD-TX and IP350UHD-TX/RX products

  • Features 4 operational modes:

    - Matrix distribution (requires 1Gb network switch)

    - Video wall (requires 1Gb network switch)

    - One-to-one HDMI extender (no network switch required)

    - One-to-many HDMI extender (no network switch required)

Specifications

  • Video Input: 1 x LAN RJ45 connector, 1 x SFP connector

  • Video Output: 1 x HDMI Type A, female, 1 x LAN RJ45 connector

  • Audio Input: 1 x Optical (S/PDIF)

  • Audio Output: 1 x 5-pin Phoenix connector

  • Ethernet Port: 2 x LAN RJ45 connector

  • Fibre Port: 1 x SFP connector (fibre module not supplied)

  • RS-232 Serial Port: 1 x 3-Pin Phoenix connector

  • USB/KVM Port: 2 x USB2.0-type B for KVM

  • IR Input: 1 x 3.5mm stereo jack

  • IR Output: 1 x 3.5mm mono jack

  • Dimensions (W x D x H ): 190mm x 128mm x 25mm

  • Packaging Dimensions (W x D x H): 260mm x 180mm x 55m

  • Unit Weight: 0.75kg

  • Power Consumption: 9W (max)

  • Shipping Weight: 1kg

  • Operating Temperature: 32°F to 104°F (0°C to 40°C)

  • Storage Temperature : -4°F to 140°F (-20°C to 60°C)

  • Power Supply: Class 3 IEEE 802.3af POE PD or 24V 1A DC PSU

Box Contents

1 x IP3000UHD-RX
1 x IRR Receiver
1 x IRE1 Emitter
1 x Audio 5-pin Phoenix Connector
1 x Serial 3-pin Phoenix Connector
1 x Mounting Kit

También podría interesarle