IP500UHD-TZ

Key Features

• Advanced 18Gbps UHD Video over 10Gb Managed Network with visually lossless compression and zero latency

• Supports HDMI 2.0 18Gbps specification with pass-through for up to 4K 60Hz 4:4:4, and with 10/12-bit HDR sources, including Dolby Vision

• Transceiver can be configured as a point of transmission or a receiver as required

• Supports video scaling and single-frame switching

• Supports all known digital HDMI audio formats including Dolby TrueHD, Atmos, DTS-HD Master Audio and DTS:X transmissions

• Support fixed signal routing function for IR, RS-232, CEC and USB

• USB end-to-end / point-to-point pass-through

• Analogue L/R audio embedding and audio breakout (balanced and unbalanced)

• Bi-directional 10/100/1000BaseT Ethernet pass-through

• Supports bi-directional 5V or 12V IR pass-through

• PoE+ (Power over Ethernet) to power Blustream Multicast products from PoE+ switch

• HDCP 2.2 compliant with advanced EDID management

• Local 12V 2.5A power input (should Ethernet switch not support PoE+, PSU sold separately) (PS122)

• Features 4 operational modes:

  - Matrix distribution (requires 10Gb network switch)

  - Video wall (requires 10Gb network switch)

  - Multiview mode (requires 10Gb network switch)

  - One-to-one HDMI extender (no network switch required)

Specifications

• Video input: 1 x HDMI Type A, female

• Video output: 1 x HDMI Type A, female

• Audio input/Output: 1 x 5-pin Phoenix connector

• Ethernet port: 1 x 10GBaseT RJ45 Video network, 1 x SFP+ module video network, 1 x 1Gb LAN RJ45 pass-through

• RS-232 serial port: 1 x 3-pin Phoenix connector

• USB/KVM Port: 1 x USB-Type B (host) , 2x USB-Type A (device)

• IR input: 1 x 3.5mm stereo jack

• IR output: 1 x 3.5mm mono jack

• Dimensions (WxDxH): 191mm x 153mm x 25mm

• Dimensions Including Connections (WxDxH): 191mm x 158mm x 25mm

• Shipping Weight: 1kg

• Operating Temperature: 32°F to 104°F (0°C to 40°C)

• Storage Temperature : -4°F to 140°F (-20°C to 60°C)

Box Contents