DA11ABL-WP

Key Features

• Dante® network wall plate interface for Bluetooth and analogue L/R audio inputs, and L/R audio outputs

• Converts 2ch Bluetooth, or un-balanced audio sources to Dante® audio

• Converts 2x Dante® audio channels to un-balanced audio outputs

• Adjustable input sensitivity from +24dBu to -28dBV via control software

• Adjustable output gain from +20dBu to -28 dBV via control software

• Supports: 44.1, 48 & 96kHz sample rates @ 16, 24 or 32 Bit

• Configurable Dante® device latency (supports 1, 2 or 5ms configurable using Dante® Controller)

• Supports AES67 RTP audio transport

• Features Class 0 IEEE 802.3af PoE for powering of product from any PoE switch

• Supports power via 12V DC adapter (supplied) for when network switch does not support PoE

• Magnetic faceplate surround allowing for both UK & EU backbox compatibility

  *Dante® is a registered trademark of Audinate Pty Ltd

Specifications

• Audio Input Connectors: 1 x Analogue Left / Right audio (3.5mm stereo jack) 

• Audio Output Connectors: 2 x Analogue RCA (Left / Right)

• Network Connectors: 1 x PoE Dante® Ethernet Connection (RJ45)

• Bluetooth: Bluetooth V5.0 - SBC / MP3 / AAC / APT-X / APTX-LL / APTX-HD, 44.1K-48KHz 16 / 24Bit

• Configuration Switches: 1 x Push button (connect / selection)

• Firmware  Upgrade: 1 x Micro-USB UART port

• Module Dimensions (W x H x D): 74mm x 74mm x 50mm (without faceplate)

• Faceplate Dimensions (W x H x D): 85mm x 85mm x 5mm

• Cut Out Dimensions (W x H x D): 52mm x 55mm x 38mm

• Mounting Hole Spacing: UK 60mm CTC, EU 60mm CTC

• Backbox Requirements: UK single gang backbox / EU single gang backbox

• Shipping Weight: 0.3kg

• Operating Temperature: 32°F to 104°F (0°C to 40°C)

• Storage Temperature: - 4°F to 140°F (- 20°C to 60°C)

• Power Supply: Class 1 IEEE 802.3af POE PD or 12V/1A DC, 2-Pin Phoenix connector/1A DC 2-Pin Phoenix connector

Box Contents